Fully-Auto L-Bar Sealer Shrink Machine Manufacturer, Supplier, Factory

Check out this video on how our Fully-Auto L-Bar Sealer Shrink Machine is used

Fully-Auto L-bar sealer shrink machine STF4535L/M+STS4525 or STS5030LS

Origin:Tianjin, China
Certificate:ISO9001
Price terms: FOB, CIF, CFR
Payment terms: T/T, L/C
Min order: 1 set

Model	STF-4535L/M	STS-4525	STS-5030LS
Power	2kw 220V	10kw 380V	16kw 380V
Packaging size	W+H≤430mm；H≤110mm	L500W400H200mm	L1200W450H300mm
Sealing/Tunnel size	L550*W450mm	L1000W450H250mm	L1500W500H300mm
Packaging Speed	1-25ppm	20-40ppm	20-60ppm
Max current	10A	30A	32A
Machine Size	L1830W850H1550mm	L1300W715H1455mm	L2000W1100H1250mm
Weight	250kg	185kg	650kg

Fully-Automatic L-bar sealer shrink machine STF4535L/M+STS4525 or STS5030LS

L-bar sealer can automatically feed, transport, sealing, shrink once completed with high efficiency. L bar type cutter can easily seal the POF film without broken. Auto photo sensor detecting and auto cutting. The shrink packaging machine is high working efficiency and suits for the products of different height and width.

1. Equipped with PLC control system and safety protection alarm device; Continuous sealing, no need to replace. Simple operation and easy maintenance;
2. Electronic counter can automatically adjust the shrink film length;
3. Increased horizontal and vertical electric eyes provide switching options. Suitable for shrinking thin and small products;
4. The sealing knife is made of sticky and high temperature resistant alloy material, and the knife is coated with Teflon non-stick film film outside. Continuous sealing and cutting is possible to achieve perfect sealing and cutting.
5. Automatic execution of chip removal process. No mess left, keep the work space neat and tidy.
6. Suitable for food, gift, hardware, daily necessities, pharmaceutical, printing

Preparation before using the automatic L-shaped shrinking machine

The automatic L-shaped shrinking machine is one of the l sealer shrink wrap machine with a higher degree of automation. The machine adopts automatic sealing and cutting without manual labor. It can be directly connected to the pipeline. The automatic L-shaped shrink wrap machine has been debugged before leaving the factory. Just pay attention to the following points before use:
1. Installation location: The installation location should be stable on the ground, and the power supply air source is easy to use. A place that can be directly connected to the assembly line.
2. Power supply: The machine has two parts: a sealing and cutting machine and a shrinking furnace. The sealing and cutting machine is 220V, and the shrinking furnace is 380V.
3. Air source: The cutting action of the automatic L-shaped sealing and cutting machine is completed by the air cylinder, so it needs to be connected to the air source pressure of 0.4~0.6MPA before use.
4. Read the manual: read the manual carefully and operate the machine according to the regulations.